Disperser Mixers
Industrial disperser mixers are mainly used in the mixing of low viscosity products such as paints at high speeds. High Speed dispersers or saw tooth mixers as they are also known consist of a long single shaft with a saw tooth blade mounted on the bottom of the shaft. Dispersers can be raised and lowered into drums for dispersing solid particles within liquids and can be wall mounted or a stand alone unit. High speed dispersers are often used in the chemical, paint, ink and specialty coatings industries. Manufacturers of industrial disperser mixers include Eiger Torrance, Netzsch, Silverson, Ross, Greaves, Sussmeyer, Hockmeyer, Moltini, Schold, Westerlins and many more.
9,000 Litre S/s High Shear Mixing Vessel
Used 9,000 Litre Stainless Steel High Shear Mixing vessel (cylindrical) on 4 legs, flat top and bottom, 2300mm dia, 2200mm on the straight, 1 off internal baffle, complete with a 55kw FLP high shear mixer.
3,000 Litre Stainless Steel Jacketed PMD Mix Vessel
Used 3,000 Litre Stainless Steel Jacketed PMD Mixing Vessel (Cylindrical), 1450mm dia, 1700mm on the straight, welded flat top, dished bottom, c/steel jacket on straight side, complete with a 4kw scrape wall type agitator, and a 11kw FLP Saw tooth disperser type agitator, mounted on 4 legs.
1,500 Litre High Speed Disperer Mix Vessel
Used 1,500 Litre 304 Stainless Steel High Speed Mixing Vessel, built by Joshua Greaves & Sons Ltd, 2003. Orientation: vertical, cylindrical, coned bottom, flat top. Dimensions: 1450mm diameter, 850mm on the straight, 525mm bottom cone, 2776mm overall height. Vessel is complete with a top mounted 30Kw High Speed Disperser Mixer supplied by Joshua Greaves & Sons Ltd,...
Netzsch Pre Mix Disperser
Used 500 liter SS Netzsch Mastermix vertical agitated jacketed pre-mix disperser vessel, Model VC-500. 900 mm dia. x 600 mm straight side vessel with clamp dished top. Top mounted disperser driven by 22/15 kw, 3/50/415 volt, 1,470 - 730 rpm Eexd 11B-T4 motor, bottom mounted scrapper agitator driven by 2.2 kw, 3/50/415 volt, 1,430 rpm Eexd-11B-T4 motor, top cover with hydraulic raise/lower...
15KW Saw tooth Mixer
Used High Speed Disperser, Wall mounted , Saw tooth blade, 15KW, raise and lower, manu by Pendraulik, 2001, type DWDU15, Nr. 478 01.
25Kw High Speed Disperser
Used High Speed Disperser, manu by Westerlins Maskinfabrik AB, 1981, Model DS-25-K, 25kw FLP electric motor, hydraulic raise & lower, 12" Saw tooth blade.
Greaves High Speed Disperser
Used High Speed Disperser Mixer, manu by Joshua Greaves & Sons Ltd, 2002. Model HSD 25-DD. Mixer complete with a 18.5K Electric motor (415,3/50Hz), stainless steel 80/60mm diamater shaft which is approx 2250mm long, 400mm diameter serrated tooth impeller, shaft speed 960rpm.
