Mixing vessels, mixing tanks or process vessels as they are also known are used for mixing of liquids, sauces, powders and gels. Mixing vessels are used in beverage, chemical, cosmetic, food, pharmaceutical and other processing industries.
Used 25,000 Litre 321 Stainless Steel Mixing Vessel. Orientation: vertical, cylindrical, coned top and bottom on legs. Dimensions: 2900mm dia, 3355mm on the straight, 920mm bottom cone. Complete with a 15kw heavy duty drive, 3 sets of 4 blade turbines, internal baffles, 8 wraps of 3" internal coils. Previously used on chemicals.
Used 10,000 Litre 316 Stainless Steel Mixing Vessels, electrically heated, lagged & clad, dished top cone bottom, 1900mm internal dia, 3800mm on the straight, 150mm coned bottom and dished top, 600mm bottom ground clearance, 6000mm overall length, complete with 1.5kw drives, 1400rpm/55rpm , on 4 legs, 500mm top man way, 2" bottom outlet, 5 off 2" top inlets, 1 off 3" centre top inlet.
Used 10,000 Litre 316 Stainless Steel Jacketed Mixing Vessel, flat top dished bottom, stainless steel 1/2 side wall limpet coil jacket , 2134mm i/dia, 2540mm on the straight, 350mm dished bottom, complete with a twin flight 3 blade Mixertech turbine agitator and a 2.2kw Electric Motor (97rpm), 4 off internal baffles, 4 off side supports, 50mm bottom outlet, top charge hatch 700mm x 600mm.
Used 10,000 Litre Stainless Steel Mixing Vessel, dished top and bottom, with side supports, 2160mm id, 2500mm tan to tan, 4800mm overall length excluding motor, 2700mm overall dia, top charge hatch 700mm x 500mm, vessel complete with a triple flight twin blade turbine agitator driven by a Stelzer drive type SNR25/06, 1992, with 4kw motor. Top connections 4 x 100mm, 1 x 100mm, 2 x 25mm, 1 x...
Used 10,000 Litre Stainless Steel Mixing Vessel, built by T.Bibby & Sons Ltd, 2007. Material of construction: 316L Stainless Steel. Vessel thickness: 4mm shell, 5mm cones. Orientation: vertical, cylindrical, coned top & bottom, on legs. Dimensions: 2440mm internal dia, 1880mm on the straight, 487mm bottom cone. Design data: design pressure 0.06 bar, design...
Used 9,000 Litre 304 Stainless Steel High Shear Mixing Vessel. Orientation: vertical, cylindrical, flat top, dished bottom. Dimensions: 2300mm diameter, 2200mm on the straight. (1) internal baffle and is supported by (4) stainless steel legs. Vessel comes with with a top mounted drop in high shear agitator driven by a 55kw Electric Motor. Shaft length is 2300mm.
Used 8,000 Litre 304 Stainless Steel Jacketed Mixing Vessel. Orientation: vertical, cylindrical, coned top and bottom on (3) legs. Dimensions: 2400mm diameter, 1900mm on the straight, 300mm coned ends. Connections: (1) 460mm top manway, (1) 50mm, (1) 80mm. Complete with an off centre top mounted twin flighted two bladed turbine agitator driven by a 1.5kw electric motor and a internal baffle....
Used 6,000 Litre 321 Stainless Steel Mixing Tank. Orientation: vertical, cylindrical, dished top and bottom. Dimensions: 1830mm dia, 2000mm on the straight, 200mm dished ends. Connections: 480mm top man way, 40mm bottom outlet. Complete with an off centre twin bladed propellor agitator, 300mm dia blade and 4 stainless steel legs.
Used 3,300 Litre 321grade Stainless Steel Mixing vessel, flat top, flat sloping bottom with mild steel skirt, 1500mm id, 1800mm deep, 2650mm total height, 500mm top manhole, 1 off sonic level indicator, 50mm bottom outlet, with a 1.5kw FLP Brook Crompton motor,and Plenty gearbox, 144rpm, 12" 4 blade turbine agitator. Previously used on inks. Cleaned
Used 3,000 Litre Mild Steel Mixing Tanks, 1520mm dia, 1220mm on the straight, 910mm bottom cone, complete with a air driven agitator, 4 off m/s legs, external copper coil for heating, 50mm bottom outlet. Previously used on bio diesel.
Mixing vessels or process vessels are often vertically mounted cylindrical vessels, the ends of the vessel may be flat, dished or conical depending on the process requirements. The vessel is either suspended in flooring, stood on its base or mounted on legs. Generally the vessel contains a top entry agitator to which impellers are attached to assist in the agitation of the material. However side or bottom entry impellers can also be fitted to vessels. The agitator is driven by a top mounted drive and electric motor. Mixing vessels can have various impellers fitted to the agitator these include propellers, turbines, paddles and anchors.
Mixing vessels can also be fitted with more than one agitator and these tend to be called contra-rotating mixing vessels these generally consist of a turbine agitator with a scrape wall or anchor type agitator. The turbine blends the product whilst the scrape wall agitator keeps the product moving around the vessel. The choice of impeller fitted to an agitator within a mixing vessel depends on the viscosity of the product being mixed. Other options for mixing vessels include adding baffles to the walls of the vessel to prevent gross vortexing or fitting with jacket or internal coils if the product requires heating or cooling.
Mixing vessels are mainly constructed by metal fabricators such as Ardeth Engineering, Briggs of Burton, Bibby's, T Giusti, Fillworth, Netzch, Sinclair Stainless and many more.