Silverson L5T High Shear Laboratory Mixer
Specification
| Condition | Used |
|---|---|
| capacity | 12 |
| Capacity Type | Litres |
| manufacturer | 2024 |
| Model Type | L5T |
Description
Used Silverson L5T High Shear Laboratory Mixer, manufactured by Silverson Machines Ltd, 2024. Model L5T. Serial No. 42851. Materials of construction all wetted parts are 316L stainless steel with the exemption of the bushing which is PTFE. The mixer is finished in a tough, easy to clean, non chip, white nylon coating. The flat base is covered by a removable non-slip mat which is resistant to most solvents. The mixer consists of three sub assemblies: the mixer body, the base assembly and the column unit. A selected mixing assembly and rotor head screen is then attached to the mixer body. The Silverson L5T high shear laboratory mixer features a control panel with a digital display unit for rpm and amps, a combined on/off switch and speed regulator and raise and lower control buttons.
The Silverson L5T high shear laboratory mixer is fitted with a 250W (0.33hp) electric main drive motor, 220/240v, single phase, 50/60hz. It has a nominal maximum speed of 8000 rpm (6000 rpm under full load). This mixer comes with a with a general purpose disintegrating head, square hole high shear screen, emulsor screen and axial flow head. The Silverson L5T high shear laboratory mixer is suitable for a wide range of applications – mixing, emulsifying, homogenising, disintegrating and dissolving. It can mix a capacity from 1 ml up to 12 litres. Overall dimensions 960mm height, 310mm width, 530mm depth. This mixer has had very little use, is in excellent condition and was previously used for mixing cosmetic products.